First off the $139.95 (plus $5.95 shipping) seemed to be really pricey. Considering that I had raised mine by merely sticking a 1" spacer under each bolt and using longer bolts. I happened to have the spacers and bolts on hand but even if you didn't the cost at a local hardware store would be $20 or so.
The reason I haven't posted about doing my risers was because the wiring harnesses are pretty short. I raised my bars 1" and the wiring harness on the left side was stretched really tight. Enough so that turning to the full right position was initially impossible. With a little tugging and stretching I finally decided it would work okay.
So I was curious about these risers. I thought perhaps they were shorter and wouldn't pull the cables. Not so, they are 1" and the ad says; "does not require cable or wire extensions".
Nice looking risers but since you can't see the spacers I used, this looks like overkill to me.
